Stairs |
|
![](Stairs%201.JPG) |
The stairs were built up a step at a time
keeping each step square. The outer stringer is made of ply, glued to the
steps and then trimmed to shape using scissors. |
The inner stringer was tough. I was advised to use
card gradually shaped round a rod and then sprung into the centre so it
could be glued in place. |
![](Stairs%201.JPG) |
![](Stairs.JPG) |
Work has now started on the hand rails and all the
fittings. These are fabricated from brass rod and tube. |
|